Infiniton TBPYE27 Manual De Usuario página 25

D) Before activating the pyrolytic cleaning function, remove any excessive spillage and make sure
that oven is empty. Do not leave anything inside it(e.g. pans, baking tray, dripping pan, slider
bracket etc.) as this could heavily damage them.
E) When finished pyrolytic cleaning, don't interrupt the power in an hour.
10. Meat probe function:
1> In waiting state, insert the meat probe, the LED will display " PROB " and the icon "
2> Rotate " K1 " to choose function you need. The related indicator will illuminated.
Functional sequence diagram:
3> Rotate " K2 " to adjust the temperature. Press "
The small LED display the temperature and the big LED display " PROB ".
4> The buzzer will sound five times when cooking finish. The setting temperature lights when the
setting temperatures arrives. If the meat probe pulled out, it will turn back to waiting state.
Note: A). The range of the temperature is 50-150 degrees. B).During probe function, the cooking time
can not be set. C) During cooking process, press stop button once, it will stop cooking, LED
flash; Press stop button again, cancel the current cooking. D)Pull out the meat probe from the oven,
it will cancel all the program. E)If the display shows " Er-3 " after the programme has been started, it
means that the temperature sensor short circuit. Please check the sensor carefully by authorized.
11.Reservation function
1> To use reservation function, clock must be set in advance. Then, in the way of setting the clock,
reserved time that oven starts to cook must be set (a> Press reservation setting button "
b> Rotate " K2 " to set the hour time of reservation. Time should be within 0--23. c> Press reservation
setting button "
0--59.), but don't press clock this time. Next, turn knob "K1 " to chosse function.
2> Press " " button to set cooking time and temperature. Then turn knob "K1" to adjust time, and
" K2 " to adjust temperature.
3> Press the " " button to finish cooking setting, and the clock will be on the screen with reservation
sign " " always lighting. But no other function signals are presented. Reservation time can be checked
by pressing "
4> At the time of reservation, cooking will start automatically after a buzzing sound. The reservation symbol
" " will put out, and other indicating signs will work normally.
Note:
1. Lamp, defrost, probe can't be reserved.
2. During the status of reservation, press cancel button once, time and temperature of reservation menu
will be shown with menu icon lighting constantly. Press again, screen returns to clock, or press start
button to return to reservation status.
3. Reminder function is invalid during reservation status.
" again; d> Rotate " K2 " to set minute time of reservation. Time should be within
", 3 seconds later the screen will show clock again.
. Press " " to confirm function setting.
" to confirm temperautre probe.
EN-9
" will light.
";