Specific Safety Rules; Tool Operation - Matco Tools MCL1614BD Instrucciones De Operación

Trinquete desarmador de brocas magnéticas 16v 1/4"
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MCL1614BD 16V 1/4" MAGNETIC BIT DRIVER RATCHET
SAVE THESE INSTRUCTIONS!

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product replace strict
adherence to cordless product safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious personal injury.
1 . Hold tool by insulated gripping surfaces when performing an
operation where the accessories may contact hidden wiring . Contact
with a "live" wire will also make exposed metal parts of the tool "live"
and shock the operator .
2 . Be aware that this tool is always in operating condition, because it
does not have to be plugged into an electrical outlet .
3 . Always be sure you have firm footing .
4 . Be sure no one is below when using the tool in high locations .
5 . Hold the tool firmly and use both hands .
6 . Keep hands and hair away from rotating parts .
OPERATING INSTRUCTION
Installing Or Removing Battery Pack
(See Fig .1, Fig .2)
1 . Your new battery pack is not fully charged . You
may need to charge it before use .
2 . Make sure the switch is in the "off" position
before insertion/removal of a battery pack .
3 . To remove a battery pack, depress both tabs
on either side of the battery and pull downward .
4 . To insert a battery pack, align the battery with
the tool housing and push battery inward until
click indicating battery is fully installed .
Charging The Battery Pack (See Fig .3)
1 . Battery may not charge when it is above
a certain preset temperature limit . Allow
temperature of battery to cool before charging .
2 . The charge process will take less than one hour .
3 . After charging, unplug the charger from the power source
and stow away in a safe place .
MCL1614BD
7 . Do not leave the tool running . Do not force tool to stay in the
"on" position . Operate the tool only when hand-held .
8 . Do not touch the impact socket or the workpiece immediately
after operation; they may be extremely hot and could burn your
skin .
9 . Some material contains chemicals which may be toxic . Take
caution to prevent working dust inhalation and skin contact . Follow
material supplier safety data .
WARNING:
MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.

Tool Operation:

This ratchet is designed to remove and install threaded
fasteners .
NOTE: Actual torque on a fastener is di rect ly related to joint hard-
ness, tool speed, condition of hex bit and the time the tool is
allowed to rotate .
Fig. 1
Use the simplest possible tool-to-hex bit hook up . Every
connection absorbs energy and reduces power .
Make sure that the ratchet is turned off and the battery
cartridge is removed before carrying out any work on the
tool. To maintain product safety and reliability, repairs,
Fig. 2
maintenance or adjustments should be carried out by a
Matco authorized service center.
Fig. 3
3
rev. 11/18/19

Publicidad

Tabla de contenido
loading

Tabla de contenido