CARLO GAVAZZI EM330 Instrucciones De Instalacion Y Uso página 9

Fig. 17
Parameters (Fig. 17)
Shared pages
Page Code
Enter current password
PASS P1
Change password
nPASS P2
SYStEM System type
P3
Ct rAtIo Current transformer ratio (TA)
P4
Vt rAtIo Voltage transformer ratio (TV)
P5
NOTE *: the result of the ratio between the current and voltage transformers must be under
1054 for AV5 analyzers and under 3148 for AV6.
MEASurE P6 Measurement type
Connection check
InStALL P7
Average power calculation interval
P int P8
(minutes)
Display mode
MOdE P9
tArIFF P10 Tariff management
8021422 | EM330
Description Values
Current password. 0000 default password.
Four digits (0000–9999)
3Pn: three phase system, 4-wire/ 3P: three-phase
system, 3-wire/ 2P: two-phase system, 3-wire
1–1000 *
1–1000 *
A : easy connection , measures total energy
without considering the direction/ b : separately
measures imported and exported energy
On: enabled/ Off: disabled
1–30
Full : complete mode/ Easy : reduced mode.
Measurements not displayed are still sent via serial
port.
On: enabled/ Off: disabled
©2014 | CARLO GAVAZZI Controls SpA| 9