Installation Instructions - Haier QDHR20 Manual Del Propietario Y Instrucciones De Instalación

INSTALLATION INSTRUCTIONS

NOTE: Before plugging in the dehumidifier, remove the
casters from the bucket and install as shown below.
Installing the Casters (only for QDHR20 and
QDHR35)
1. Remove the 4 casters from the bag taped to the inside of
the water bucket lid.
2. Carefully lay the dehumidifier down on it's front or back on a
padded surface to prevent damage to unit.
3. Push the casters into the holes on the base of the unit until
they lock in place.
4. Place the unit upright and wait 1 hour before use.
6
Dehumidifier
is on it's front
49-5000430 Rev. 3