Pleasant Hearth FA330S Manual De Instrucciones página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ASSEMBLY INSTRUCTIONS
1. Attach the two front feet (B) to the front of the
screen (A) by inserting four M6x25mm bolts (AA)
through the pre-drilled holes in the feet (B) and
through the screen frame (A). Secure with four
M6 nuts (BB). Use a wrench (DD) to hold the bolt
(AA) in place while using the other wrench (DD) to
tighten the nut (BB). Repeat for all 4 bolts (AA)/
nuts (BB).
Hardware Used
M6x25mm Bolt
AA
M6 Nut
BB
Wrench
DD
2. Attach the back feet (C) to the back side of the
screen (A) by inserting one M6x15mm Bolt (CC)
into the hole in each foot (C) as illustrated in
figure 2. Adjust feet (C) to desired width. Tighten
against the screen (A) using the wrench (DD).
NOTE: The back feet are designed to adjust
to the inside width of your fireplace opening so
that, if desired, the screen can be placed flush
against the fireplace.
Hardware Used
CC
M6x15mm Bolt
Wrench
DD
1
BB
x 4
x 4
2
x 2
4
AA
A
B
A
C
CC

Publicidad

Tabla de contenido
loading

Tabla de contenido