Publicidad
Idiomas disponibles
Idiomas disponibles
Drum Cleaning
Printed images may be light or distorted when the
machine is used immediately after installation or after
a long period time of not using the machine. If printed
images are light or distorted, clean the drum inside the
machine as necessary.
1
Press
.
2
Press [Adjustment/Maintenance] →
[Maintenance] → [Clean Drum].
3
Press [Start].
It takes approximately 35 seconds to clean the drum.
When cleaning is complete, try printing again.
NOTE
Drum cleaning cannot be performed during printing.
Cleaning the Touch Panel Display
If the touch panel display becomes dirty and the screen
may not be seen clearly, clean the touch panel display.
1
Wipe the touch panel display with a cloth
dampened in water or a mild cleaning
agent, and then wipe the area clean with a
soft, dry cloth.
Upright Control Panel
Control Panel (Flat)
3
Routine Maintenance
59
Publicidad
Capítulos
