Overheating Protection - WeatherTech SmartCharge Manual Del Usuario

**)The ripple wave describes how many disturbances are exhibited by current and volt-
age. A rippled voltage can cause damage to other equipment connected to the battery.
The SmartCharge 200 supplies voltage and current with very low voltage rippling. This
increases the life of the battery and ensures that equipment connected to it will not be
damaged.
Recommended Minimum AWG Size for AC Extension cords
Length of cord feet (m)
25 (7.6)
50 (15.2)
100 (30.5)
150 (45.6)

OVERHEATING PROTECTION

The SmartCharge 200 is equipped with overheating protection. In high ambient tem-
peratures the output power is reduced. Do not cover the charger.
BATTERY CABLES
The SmartCharge 200 is equipped with a set of battery cables with battery terminal
clips and one set of battery cable with eyelet terminals.
MAINTENANCE
The SmartCharge 200 is maintenance-free. The charger must not be opened; doing
so will invalidate the warranty. If the power cable is damaged it must be replaced by
MacNeil Automotive Products, Ltd. or it's authorized representative. The charger casing
can be cleaned using a damp cloth and mild cleaning agent. Remove the plug from the
power socket before cleaning.
LIMITED WARRANTY
MacNeil Automotive Products, Ltd., issues this limited warranty to the original pur-
chaser of this product. This limited warranty is not transferable. MacNeil Automotive
Products, Ltd. warrants this unit for five years from the date of purchase against
defect workmanship or material. It is the obligation of the purchaser to forward the unit
together with proof of purchase to the manufacturer or its representative with trans-
portation cost prepaid. This warranty is void if the unit is abused, handled carelessly
or repaired by anyone other than MacNeil Automotive Products, Ltd. or its authorized
representative. MacNeil Automotive Products, Ltd. makes no warranty other than this
12 • US
AWG Size of cord
18
18
18
16