Function Setting - Panasonic CQ-C300U Manual De Instrucciones

Function Setting

1
Hold down [VOL] (PUSH
SEL: Select) for 2. sec. or
more to open the menu.
2
Press [VOL] (PUSH SEL: Select) to
select a mode to be adjusted.
3
Turn [VOL] clockwise
or counterclockwise to
adjust.
Notes:
• The sequence and contents of setting items may
depend on the conditions of devices to be connected.
For further information, refer to the System Upgrade
Guidebook or the instruction manuals for the devices
to be connected.
• To return to the regular mode, press [DISP].
• If no operation takes place for more than 5 seconds
in function setting, the display returns to the regular
mode.
Demonstration
You can set up the monitor to display or hide the
demonstration screen.
1 : On (Default)
2 : Off
Note: Button operation with either the main unit or
remote control allows users to cancel the demonstration
screen for 20 seconds and enable the selected operation
even in the demo-on mode.
Level Meter Display Patterns (PATTERN)
Variety: 4 types, OFF
Mute/Attenuation
You can select mute or attenuation.
1 : Volume down by 10
steps
2 : Volume off (Default)
: Off
: Pattern 1 (Default)
: Pattern 2
: Pattern 3
: Pattern 4
AUX1 Skip
If AUX1 is not used, the AUX1 mode is skipped when
selecting the source.
1 : On (Skip disabled.)
(Default)
2 : Off (Skip enabled.)
CQ-C300U
23