Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Specifications
Power Supply
Current Consumption
Maximum Power Output
Tone Adjustable Range
Speaker Impedance
Pre-amp Output Voltage
Subwoofer-output Voltage
Pre-amp Output Impedance
Subwoofer-output Impedance
Front AUX input
Input Impedance
Allowable External Input
Connector
Dimensions (Main Unit)
Weight (Main Unit)
Sampling Frequency
DA Converter
Pick-Up Type
Light Source
Wave Length
Frequency Response
Signal to Noise Ratio
Total Harmonic Distortion
Wow and Flutter
Channel Separation
FM
Frequency Range
Usable Sensitivity
50 dB Quieting Sensitivity
Frequency Response
Alternate Channel Selectivity
Stereo Separation
Image Response Ratio
IF Response Ratio
Signal to Noise Ratio
AM
Frequency Range
Usable Sensitivity
Power Output:
18 W RMS x 4 Channels at 4 and
THD+N
Signal to Noise Ratio:
85 dBA (reference: 1 W into 4 )
DC 12 V (11 V – 16 V), Test Voltage 14.4 V, Negative Ground
Less than 2.1 A (CD mode, 0.5 W 4-Speaker)
50 W x 4 (at 1 kHz), volume control maximum
Bass: ±12 dB (at 100 Hz), Treble: ±12 dB (at 10 kHz)
4 – 8
2.5 V (CD mode: 1 kHz, 0 dB)
2.5 V (CD mode: 1 kHz, 0 dB)
200
200
10 k
2.0 V
3.5 mm Stereo mini-pin
178 (W) x 50 (H) x 160 (D) mm {7˝ x 1
1.3 kg {2 lbs. 14 oz}
8 times oversampling
1 bit DAC System
Astigma 3-beam
Semiconductor laser
790 nm
20 Hz – 20 kHz (±1 dB)
96 dB
0.01 % (1 kHz)
Below measurable limits
85 dB
87.9 MHz – 107.9 MHz
10.2 dBf (0.9 µV, 75 )
15.2 dBf (1.6 µV, 75 )
30 Hz – 15 kHz (±3 dB)
75 dB
35 dB (at 1 kHz)
55 dB
100 dB
62 dB
530 kHz – 1 710 kHz
27 dB/µV (22 µV, S/N 20 dB)
1%
Above Specifications comply with EIA standards.
Notes:
• Specifications and design are subject to modification without
notice due to improvements.
• Some figures and illustrations in this manual may be
different from your product.
CQ-C300U
15
/
˝ x 6
5
/
˝ }
16
16
29
Publicidad
Capítulos
Tabla de contenido
