Operation - HAMPTON BAY 52-NORD Guía De Uso Y Mantenimiento

Assembly - Attaching the Switch Cup
1
Attaching the switch cup
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
NOTE: Notice the location of the fan's slide switch. This is
the switch used to change the fan's directional rotation.
For more information on the operation of this switch, see
Operating Your Fan on page 13.
□
Remove the three screw (VV) from the switch cup cover (F)
and save them.
□
Align the three holes in the switch cup below the fan motor
assembly (E) with the three holes in the switch cup cover (F).
Make sure the notch in the switch cup cover (F) clears the
reversing switch in the switch cup.
□
Position the switch cup cover (F) and re-install the three
screws that were removed in first step to secure the switch
cup cover (F).
□
Attach the pull chain extensions (EE) to the fan pull chain.

Operation

OPERATING YOUR FAN
Turn on the power and check the operation of the fan. The fan pull
chain controls the fan speed as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low, 4 pulls - off
The appropriate speed settings for warm or cool weather depends on
factors such as the room size, ceiling height, and number of fans.
The slide switch (XX) controls the direction of the blades: forward
(switch left) or reverse (switch right).
NOTE: Wait for the fan to stop before reversing the direction of the
blade rotation.
A. Warm weather - (Forward) A downward airflow creates a cooling
effect. This allows you to set your air conditioner on a higher setting
without affecting your comfort.
B. Cool weather - (Reverse) An upward airflow moves warm air off of the
ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.
VV
13
Please contact 1-855-HD-HAMPTON for further assistance.
E
F
EE
A. Warm Weather
XX
B. Cool Weather
XX
HAMPTONBAY.COM