us_main.book.book Page 72 Wednesday, June 16, 2021 3:46 PM
72 LIMITED WARRANTY
Problem
Knobs melt
Oven or racks are
stained after
using aluminum
foil
Flame or power is
weak
Surface is not level
Oven is tipping
Improper usage
• Do not leave door at stop position during Broil/Bake mode or right after cooking.
Aluminum foil has melted in the oven
• Never cover the oven bottom or cover an entire rack with materials such as
aluminum foil.
• If the foil has already melted onto the oven, it will not affect the performance of
the oven.
Gas pressure may be weak
• Check with gas supplier first.
Range not leveled
• Check with installer first.
• Use carpenter's level
a
Anti-tip device not installed correctly
Approximately 0.65" (16.5 mm)
a
Level both sides of range
b
Screw must enter wood or concrete
c
Anti-tip bracket
d
Wall plate
e
• Check with installer first.
Possible Cause & Prevention
to check level.