Functions Menu; Warning Indication - Husqvarna PG 820 RC Manual De Instrucciones

Functions menu

Oscillation
This function is used to get the machine to oscillate/swing
during grinding to prevent edges/ridges between passes.
• ON/OFF - activates/deactivates oscillation, for
example when turning the machine. When oscillation
is reactivated, previous settings will be used.
• OFFSET - is used for directional correction of
machine displacement when grinding.
• AMPLITUDE - is used to set how wide the machine
will oscillate.
• FREQUENCY - is used to set how fast the machine
will oscillate.
NOTICE! There is a delay before this correction comes
into play.
Explanation of settings
• Oscillation deactivated. Use the arrow keys to
activate.
REV
FWD
SPEED 0
0
POWER
0
m/s
OFF
• Oscillation activated. Press OK to activate setting for
OFFSET.
REV
FWD
SPEED 0
0
POWER
0
m/s
4
ON
• OFFSET adjustment. Press the arrow keys to adjust
setting for OFFSET. Press OK to adjust AMPLITUDE.
REV FWD
SPEED 0
POWER 0
0
m/s
4
ON
24 – English
OPERATING
Jan 05 12:45
REV FWD
SPEED 0
0
POWER
Jan 05 12:45
REV FWD
SPEED
0
0
POWER
4 1
OK
Jan 05 12:45
FWD
REV
SPEED
0
POWER 0
4 1
OK
• AMPLITUDE adjustment. Press the arrow keys to
adjust seting for AMPLITUDE. Press OK to adjust
FREQUENCY.
REV FWD
SPEED 0
0
POWER
0
m/s
ON 4
• FREQUENCY adjustment. Press the arrow keys to
adjust setting for FREQUENCY. Press OK to return to
ON/OFF mode.
REV
FWD
0
SPEED
0
POWER
0
m/s
ON 4
NOTICE! Pay attention to the oscillation when the
machine is running close to walls and edges. DISABLE
oscillation when turning the machine or grinding near
protruding objects.

Warning indication

The warning triangle comes on and the machine's
warning lamp flashes faster when the machine detects a
fault. For more information regarding the fault that has
been detected and what action to take, see the
'Troubleshooting' section
REV FWD
0
SPEED
0
POWER
OFF
Jan 05 12:45
REV FWD
SPEED 0
0
POWER
4 1
OK
Jan 05 12:45
REV FWD
SPEED 0
0
POWER
4 1
OK
Jan 05 12:45
REV FWD
0
SPEED
0
POWER
0