INTENDED USE
The product is only intended for circulating room air. Only use according to these instructions. Any other
use can lead to damages to product or injuries.
The Imtron GmbH assumes no liability for damage to the product, for property damage or for personal
injury due to careless or improper usage of the product, or usage of product which does not meet the
manufacturer's specified purpose.
COMPONENTS
The product may be available in different colors.
A. Control Panel
A1. OSC button (oscillation)
A2. Timer switch ON / 0-120 Min.
A3. Speed level 1-3 /OFF buttons
B. Fan body
C. Grille
D. Supply cord with plug
E. Recess for power cord
F. Foot (right)
G. Nut
H. Foot (left)
BEFORE FIRST TIME USE
• Remove the product and accessories carefully from the original packaging. It is recommended to keep
the original packaging for storage. If you wish to dispose of the original packaging, please observe
applicable legal provisions. Should you have any questions regarding proper disposal, contact your
local waste management center.
• Inspect the delivery contents for completeness and damages. Should the delivery contents be
incomplete or damaged, contact your sales outlet immediately.
• After unpacking, please refer to chapter Cleaning and care.
ASSEMBLING AND MOUNTING
Attach both foot parts together.
1
Place the product on the assembled stand and ensure that the power cord is positioned on the
2
recess.
Use the nut to fix the stand on the product.
3
4
Place on a stable level surface.
Caution
• The product may only be connected to the mains once it has been completely assembled.
• The appliance must not be disassembled during operation, general care, cleaning and user
maintenance.
• The product may never be operated without the stand or in a horizontal position.
OPERATION
Plug in the product.
5
To turn on the product, set the Timer switch to ON and select a speed level 1-3. To turn off the
6
product, press the OFF button.
Use the OSC switch to turn on/off the oscillation function.
7
IM_OTF802-W_160111_V04_HR.indb 13
13
EN
11/1/16 3:58 PM