Locating a station by
name
— List-up
1
Press (LIST) momentarily.
The name assigned to the station currently
tuned appears in the display.
2
Press either side of (DISC/PRST)
repeatedly until you find the desired
station.
When no name is assigned to the selected
station, the frequency appears in the
display.
3
Press (ENTER) to tune in the desired
station.
Note
Once the station name or frequency has been
displayed for five seconds, the display goes back to
its normal mode.
18
Other Functions
You can also control the unit with a rotary
commander (optional).
Labelling the rotary
commander
Depending on how you mount the rotary
commander, attach the appropriate label as
shown in the illustration below.
D S P L
M O D E
S O U N D
S O U N D
M O D E
D S P L