• Carefully read the entire instruction manual prior to using
the appliance and store it carefully for future reference.
• Caution: The power of this double fryer is 3600 watts. Therefore
check the maximum allowed power of the group when you want
to switch on both heating elements at the same time.
• If both heating elements are switched on at the same time,
they use such an amount of power (3600 watts) that the fryer
must be connected to a separate 16 A group. No other appliances
should be connected to this group.
• Only use this appliance for the purposes described
in the instruction manual.
•
Caution! Avoid contact with hot surfaces when the
appliance is switched on.
• Only connect the appliance to alternate current, to an earthed
wall socket, with a mains voltage that corresponds with the
information provided on the information plate of the appliance.
• Never bend the power cord sharply or allow it to run across hot
parts.
• Fully unwind the cord to prevent it from overheating.
• Never place the appliance near appliances that give off heat,
such as ovens, gas cookers, hotplates, etc. Keep the appliance
away from walls or other objects that may catch fire, such as
curtains, towels (cotton or paper, etc.).
• Always make sure the appliance is placed on an even, flat surface
and is only used indoors.
• Do not switch on the appliance with an empty reservoir.
• Do not leave the appliance unsupervised if the appliance
is operational.
• Do not use a time switch or remote control to switch on
the appliance, this is very unsafe.
• Remove the cover from the fryer during use.
• If you want to move the appliance, make sure it is switched
off and has fully cooled down. Use both hands when moving
the appliance.
SAFETY INSTRUCTIONS - EN
EN - 11