Forest-Master FM8 Manual Del Usuario página 27

10TW Trolley
Assembly of the full height trolley is basically the same as for the FMT stand
except that the castor assembly bolts into the bottom of the front leg. Use
the nut and bolt that fastens the two parts of the front foot assembly
together. Ensure the power is disconnected before assembly.
Fitting the 10TW Trolley to the FM8P & FM10P
Remove the rear wheels from the
axle. Remove the throttle mount
and throttle. and remove the
rear legs. Remove the front leg
assembly from the log splitter
and remove the castor assembly
from the front leg. Keep all nuts
and bolts as these are used on the
new stand.
FM8(P) & FM10(D/T/TW/P)
Attach the wheels to the axles on the rear
cross beam. Attach the new rear legs and
throttle assembly to the log splitter and
attach the rear wheel assembly to the
legs. Attach the new front leg to the log
splitter and attach the castor assembly to
the bottom. Finally attach the connecting
bar between the front foot and rear wheels
27