Precautionary Measures To Be Taken By The Operator; Operating The Machine; Controls; Assembly And Adjustment - IBS Scherer F Traducción Del Manual Original

5.7. Precautionary measures to be taken by the operator

IBS-Parts Cleaning Devices conform to type class A 1 (EN 12921-3; 3.15.1).
A danger area which is appropriate for the operating conditions (e.g. geometry and surface area of workpieces, intensity
of cleaning) must be defined. For normal cleaning processes, IBS recommends a danger area of 2 m around the device.
DANGER!
The danger area identified by means of a risk assessment:
∙ Must be designated a fire hazard area
EN
∙ Must remain free of obstructions in order to allow unimpeded access at all times
∙ Must be equipped with effective natural ventilation
∙ Smoking is not permitted in the danger area
∙ Naked flames or other sources of ignition are not permitted in the danger area
∙ Keep everything as clean as possible when working with cleaning agents, oils and lubricants
∙ Operating and maintenance personnel must receive proper training
∙ The operating instructions and the standard operating procedure must be attached to the device

6. OPERATING THE MACHINE

6.1. Controls

The device is switched on with a foot-operated safety switch.

6.2. Assembly and adjustment

6.2.1. Assembly of the Parts Cleaning Device and the IBS-Special Pump
∙ Remove the packaging.
∙ Remove the screws on the upper surface of the 50 litre barrel and store them in a safe place until they need to be used again for
return transport.
∙ Screw the pump (4) into the 2" opening (the outflow for the brush pipe should be facing right).
∙ Screw in the ¾" return connection (enclosed) into the ¾" return opening.
∙ Place the 50 litre barrel (1) on the base plate (2). The 2" screw must face the middle between the square plug spars (3).
48
IBS-BA_Typ_F_F2_F2-D-DE_CZ_PL_ES_EN_04.2020
5 11
7
3
4
1
6
9
10
8
2