Threading The Upper Looper - Brother 884-B01 Manual De Instrucciones

Threading the upper looper

Run the thread in the sequence illustrated,
following the pink color and the numbers next to
each threading point.
1
2
9
8
9
7
1. Open the front cover by sliding to the right and
guiding the top toward you.
2. Pull the thread off the spool and directly up
through the thread holder 1 and the thread
holder 2 on the thread tree from back to front.
3. Pass the thread through the thread guide 3 on
the top of machine.
4. Pass the thread through the tension disc 4
which is in the channel next to the pink tension
adjustment dial.
16
3
3
4
5
8
7
6
6
5. Guide the thread down the channel and pass
the thread through the threading points
5678 next to the pink color marks following
the numerical order in the accompanying
illustration.
NOTE:
Make sure to thread only through the upper thread
take up 7 .
6. Pass the thread through the eye of the upper
looper 9.
NOTE:
If the upper looper thread breaks during sewing:
This may be caused by the lower looper thread getting
4
caught on the upper looper. If this happens, lower the
upperlooper by turning the hand wheel, remove the
lower looper thread from the upper looper, and re-thread
the upper looper from at least the tension disc.