Sunex Tools SX264 Manual De Instrucciones

Operating Instructions • Warning Information • Parts Break down
ALWAYS READ INSTRUCTIONS BEFORE
USING POWER TOOLS
ALWAYS WEAR SAFETY GOGGLES
WEAR HEARING PROTECTION
AVOID PROLONGED EXPOSURE TO VIBRATION
RPM OF CUTTING WHEEL MUST MEET OR
RPM RPM RPM
EXCEED RPM OF TOOL (20,000 RPM)
SPECIFICATIONS
Collet Size .....................................1/4"
Max. Free Speed ............ 20,000 RPM
Weight .....................................1.03 LB
Length ...........................................5.5"
SX264: Parts Breakdown & Operating Manual
WARNING
Average Air Consumption ....... 4 CFM
Air Inlet ................................. 1/4" NPT
Air Supply Hose Size .............3/8" I.D.
Sound Level ......................... 93.2 dBA
Some dust created by power sanding, sawing,
grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed to
filter out microscopic particles.
1
WARNING
SX264
1/4" MINI
RIGHT
ANGLE DIE
GRINDER
Rev. 05/18/10