Descargar Imprimir esta página

Sunex Tools SX301B Instrucciones De Operación

Mini disco abrasivo de ángulo derecho/ mini amoladora de troqueles recta

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Operating Instructions • Warning Information • Parts Break down
SX301B - SPECIFICATIONS
Max. Free Speed ......................22,000 RPM
Collect Size ............................................ 1/4"
Horsepower ...................................... 0.25HP
Avg. Air Consumption .................... 4.5 CFM
Air Inlet .............................................1/4 NPT
Air Pressure ......................................90 psig
Recommended Hose Size ............. 3/8" I.D.
Length .................................................... 5.1"
Weight ..............................................1.1 Lbs.
Sound Level ......................................97 dBA
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks
that are specially designed to filter out microscopic
particles.
SX301B & SX307B: Parts Breakdown & Operating Manual
WARNING
MINI RIGHT ANGLE DIE GRINDER
MINI STRAIGHT DIE GRINDER
SX307B - SPECIFICATIONS
Max. Free Speed ........................ 28,000 RPM
Collet Size ................................................ 1/4"
Horsepower ........................................ 0.25HP
Air Consumption ............................... 4.5 CFM
Air Inlet ...............................................1/4 NPT
Air Pressure ........................................ 90 psig
Recommended Hose Size ................3/8" I.D.
Length .......................................................5.1"
Weight ................................................ 0.8 Lbs.
Sound Level ........................................ 97 dBA
RATED RPM OF ACCESSORY
RPM
RPM
RPM
USED MUST EXCEED THE
MAXIMUM TOOL RPM SHOWN
READ THIS MANUAL BEFORE
OPERATING TOOL
ALWAYS WEAR EYE
PROTECTION
ALWAYS WEAR HEARING
PROTECTION
ALWAYS WEAR HAND
PROTECTION
ALWAYS WEAR FACE
PROTECTION
AVOID PROLONGED EXPOSURE
TO VIBRATION
© Copyright 2017, Sunex Tools
1
SX301B
SX307B
WARNING
Rev. 08/22/17
®

Publicidad

loading

Resumen de contenidos para Sunex Tools SX301B

  • Página 1 PROTECTION that are specially designed to filter out microscopic particles. AVOID PROLONGED EXPOSURE TO VIBRATION © Copyright 2017, Sunex Tools ® SX301B & SX307B: Parts Breakdown & Operating Manual Rev. 08/22/17...
  • Página 2 • For safety, top performance and maximum durability of parts, operate this tool at 90 psig; 6.2 bar max air • SX301B - RPM OF THE ACCESSORY MUST EXCEED pressure with 3/8" diameter air supply hose. TOOL RPM. Use accessories rated at 22,000 RPM or higher.
  • Página 3 Bearing (696Z) RS89636 Collet Nut RS89617 End Plate RS89129 11mm Wrench RS89118 Steel Ball (2.5) RS89130 17mm Wrench RS89119 Rotor Blade (Pk of 4) RSSX301BPLK Product Label (not shown) RS89620 Rotor SX301B & SX307B: Parts Breakdown & Operating Manual Rev. 08/22/17...
  • Página 4 RS89112 Locking Plug RS89128 Collet Nut RS89113 O-Ring RS89129 11mm Wrench RS708A04 O-Ring RS89130 17mm Wrench RS89115 Valve Plug RS89131 Rotor Collar RS89116 Bearing (696Z) RSSX307BPLK Product Label (not shown) SX301B & SX307B: Parts Breakdown & Operating Manual Rev. 08/22/17...
  • Página 5 A rust inhibitive oil to you. Return equipment or parts to Sunex Tools ® , or an authorized is acceptable for air tools.
  • Página 6 EVITAR EXPOSICIÓN específicamente diseñados para filtrar las partículas PROLONGADA A LAS microscópicas. VIBRACIONES ® © Copyright 2017, Sunex Tools SX301B y SX307B: Desglose de piezas y manual de operación 6 Rev. 08/22/17...
  • Página 7 No se extra limite al operar esta herramienta. graves o peligro de muerte, así como daños materiales. • Note el sentido de la rotación ANTES de operar esta SX301B y SX307B: Desglose de piezas y manual de operación 7 Rev. 08/22/17...
  • Página 8 Nunca use ningún husillo, mandril ni ningún otro adaptador para convertir la amoladora de troqueles a cualquier otra aplicación. SX301B y SX307B: Desglose de piezas y manual de operación 8 Rev. 08/22/17...
  • Página 9 Sunex Tools ® . La obligación antes mancionada queda bajo la responsabilidad exclusiva de Sunex Tools ®...
  • Página 10 POUR LE VISAGE comme les masques à poussière qui sont conçus pour filtrer ÉVITEZ L’EXPOSITION les particules microscopiques. PROLONGÉE AUX VIBRATIONS ® © Copyright 2017, Sunex Tools SX301B et SX307B: Vue éclatée des pièces et mode d'emploi 10 Rev. 08/22/17...
  • Página 11 • Le manquement d'observer ces inscriptions peut avoir de bras. comme conséquence des blessures sérieuses ou mortelles et/ou des dégâts matériels. • Vérifier le sens de rotation AVANT d'utiliser cet outil. SX301B et SX307B: Vue éclatée des pièces et mode d'emploi 11 Rev. 08/22/17...
  • Página 12 L’huile antirouille convient aux outils la meuleuse à rectifier pour une autre application. pneumatiques. Un trop-plein réduit la puissance de SX301B et SX307B: Vue éclatée des pièces et mode d'emploi 12 Rev. 08/22/17...
  • Página 13 à votre cas. Retourner l'équipement ou les pièces à Sunex Tools ® , ou à un centre de service de garantie autorisé, port prépayé. S'assurer d'inclure votre nom, votre adresse, une preuve de la date d'achat et la description de la défaillance présumée.

Este manual también es adecuado para:

Sx307b