Service; Hedge Trimmer Safety Warnings; Proposition 65; Child Safety - GreenWorks HTF313 Manual Del Operador

battery pack may create a risk of fire when used with
another battery pack.
• Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or fire.
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with plenty of soap and water. If liquid
contacts eyes, immediately seek medical help. Liquid
ejected from the battery may cause irritation or burns.
2.6

SERVICE

• Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
2.7 HEDGE TRIMMER SAFETY
WARNINGS
• Use both hands when operating the hedge trimmer.
Using one hand could cause loss of control and result
in serious personal injury.
• Keep all parts of the body away from the cutter blade.
Do not remove cut material or hold material to be cut
when blades are moving. Blades coast after turn off.
Make sure the switch is off when clearing jammed
material. A moment of inattention while operating the
hedge trimmer may result in serious personal injury.
• Carry the power tool by the handle with the cutter
blade stopped. When transporting or storing the
power tool always fit the cutting device cover. Proper
handling of the hedge trimmer will reduce possible
personal injury from the cutter blades.
• Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may make
exposed metal parts of the power tool "live" and could
give the operator an electric shock.
• DANGER – Keep hands away from blade.Contact with
blade will result in serious personal injury.
• Keep cable away from cutting area.During operation
the cable may be hidden in shrubs and can be
accidentally cut by the blade.
• Always store idle power tools indoors. When not in use,
power tools should be stored indoors in a dry place, out
of reach of children.
• Do not use the power tool in bad weather conditions,
especially when there is a risk of lightning. This
decreases the risk of being struck by lightning.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
English
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
2.8

PROPOSITION 65

This product contains a chemical known to the state of
California to cause cancer, birth defects or other
reproductive harm. Some dust created by power sanding,
sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals
are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and other
masonry products;
• Arsenic and chromium from chemically treated lumber.
Your risk of exposure to these chemicals varies depending
on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area,
and work with approved safety equipment, such as dust
masks that are specially designed to filter out microscopic
particles.
Save these instructions.
3

CHILD SAFETY

Tragic accidents can occur if the operator is not aware of the
presence of children.
• Keep children out of the working area and under the
watchful care of a responsible adult.
• Do not allow children under the age of 14 to operate this
machine. Children who are 14 years of age and older
must read and understand the operating instructions and
safety rules in this manual and must be trained and
supervised by a parent.
• Stay alert, and turn the machine off if a child or any other
person enters the working area.
• Use extreme care when approaching blind corners,
doorways, shrubs, trees, or other objects that may obscure
your view of a child who may run into the path of the
machine.
4

SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this product.
Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
product better and safer.
Symbol
V
A
Hz
5
WARNING
Explanation
Voltage
Current
Frequency (cycles per second)
EN