Installation Instructions - Home Decorators Collection 1002099636 Manual De Instrucciones

ASSEMBLY:
1 Ground Screw (#12)
1 Cross Bar (#11)

INSTALLATION INSTRUCTIONS:

1. Screw the two Mounting Screws (#10) into the cross bar (#11). Mount the cross bar (#11) to the
Outlet Box (#9) using the two provided Outlet Box Screws (#13). [Make sure the threads of the
Mounting Screws (#10) are facing outside when the cross bar (#11) is attached to the Outlet Box
(#9).] The side of the Cross Bar (#11) marked "GND" must face out.
2. Connect the white wire from the fixture to the white wire from the Outlet Box (#9), and the black
wire from the fixture to the black wire from the Outlet Box (#9). Cover the two wire connections
using the provided Wire Connectors (#8). Wrap the two wire connections with electrical tape for
a more secure connection. If your outlet box has a ground wire (green or bare copper), connect
fixture's ground wire to it using the wire connector (#8). Otherwise connect the copper ground
from the fixture to Ground screw (#12) on the Cross bar (#11). Note: If you have electrical
questions, consul t your local electrical code for approved grounding methods.
Page 6
2. Cover
1. Screw
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
2 Outlet Box Screws (#13)
3 Wire Connectors (#8)
3. Cap Nut
4. Back Plate
5.Light Bulb
6.Glass Panel
7. Fixture Frame
2 Mounting Screws (#10)