TECshow PINSPOT LED BAR Manual De Usuario página 3

2. WARNING
Like all electronic products, Pinspot
LED Bar must be used with common
safety precautions in mind.
• This appliance must be earthed.
• The unit contains no user-serviceable parts.
Refer servicing to qualified technicians only.
• The electrical installation should be carried
out by qualified personal only, according to
the regulations for electrical and mechanical
safety in your country.
• Disconnect from electric mains power supply
before removing covers or changing spare
parts. Keep case closed while operating.
• Do not insert objects into air vents.
• Keep away from flames and flammable mate-
rial. Keep away from liquids. Never operate in
rain or in damp conditions.
• If effect lights are dropped or struck, discon-
nect mains power supply immediately. Have
a qualified engineer inspect for safety before
operating.
• LED and metal become hot during operation.
Allow time to cool before handling.
• Not suitable for mounting on normally flam-
mable surfaces. Disconnect from mains supply
before removing cover. Minimum distance to
lighted object is 0.4m.
• Without changeable structure by non-qualified
user, please do not open the cover or have any
change at will, otherwise, it may cause accident!
• The appliance is for adult use. Keep out of
reach of children. Never leave the unit running
unattended.
• Please use the original packing (recommend)
when the device is to be transported.
• Maximum save ambient temperature is 40°C.
Don't use this unit at higher ambient tempera-
tures.
• Due to safety reasons it is prohibited to make
unauthorized modifications to the unit.
• To protect the environment, please try to recy-
cle the packing material as much as possible.
• Read user manual instructions thoroughly
before operating. Follow the instructions. Never
remove warning or information labels from the
unit.
Caution
There are no user serviceable parts inside this unit.
Do not attempt any repairs yourself, doing so will
void your manufactures warranty. In the unlikely
event your unit may require service please contact
your local dealer.
Particular Warning
Never look directly into the light source! Don't use
the effect in the presence of persons
suffering from epilepsy. Please install the
product correctly according to the in-
struction of the user manual. To avoid any accident,
it is not allowed to install the product with any
way not instructed on the user manual. If accident
happens because users do not install the product
according to the instruction of the user manual, the
manufacturer will not take any responsibility.
Please Note
Specifications and improvements in the design
of this unit and this manual are subject to change
without any prior written notice.
Important
The wires in this mains lead are colored in ac-
cordance with the following code.
EU
Green and Yellow - Earth (E)
Blue - Neutral (N)
Brown - Live (L)
Warning: This appliance must be earthed.
| Tecshow Pinspot LED Bar
English version
P. 3