TECshow PINSPOT LED BAR Manual De Usuario página 7

Multiple installation
The Pinspot LED Bar is equipped with a power out-
put that allows more Pinspot LED Bar to be used in
series with each other without occupying additional
electrical outlets.
7. SET UP
1. Open the shipping carton and carefully remove
the device from the shipping carton;
2. Be sure to remove packing material from
around the device, especially in the vicinity of
the LED light source;
3. Install the device in the appropriate place, and
fix it well;
4. Plug mains power cord from the device into
appropriate power supply socket;
5. If the cable is not long enough, please connect
with the standard and good quality extension
cable.
Important: The maximum load current at this
power supply output cannot exceed 30 units.
Connect more Pinspot Bar
| Tecshow Pinspot LED Bar
English version
P. 7