EN
3. Adjustments
3.1 Unfolding the chassis
Place the chassis upright. Grasp with your left hand the lower frame at left side
(fig. 1; No. 1) and keep the locking button pressed (fig. 1; no. 2). Then lift with your
right hand the handle bar upwards (fig. 2; no. 2) until the locking mechanism is
released.
Release the lower frame, grasp the hand-grip (fig. 2; no.1) and unfold the chassis
completely by lifting the handle bar upwards (fig. 2; no.2) until the fixing mecha-
nism at both sides is closed.
WARNING
Ensure that both locking devices of the chassis
are engaged before use.
3.2 Folding the chassis
Keep the releasing button under the right side of the handle pressed (fig. 3, no.
1) and pull both releasing sliders backwards (fig. 3; no. 2) and simultaneously the
handle bar downwards (fig. 3; no. 3).
Now pull the hand-grip (fig. 4; no. 1) with your left hand and push the handle bar
(fig. 4; no. 2) until the locking button clicks in position.
WARNING
Take care that you don't entrap extremities in
moveable parts.
40
40