Troubleshooting - Philips HR7744 Manual De Instrucciones

EN
|

Troubleshooting

Problem Solution
The food All functions except the blender only work when
processor does the blender cap is assembled on the motor unit.
not work. Check whether the blender cap is assembled
properly on the motor unit (see page 25). Also
check whether the lid has properly locked into
place on the bowl ('click').
Both the If both the blender jar and the food processor
blender jar and bowl have been assembled correctly, only the
the food blender works. If you want to use the food
processor bowl processor bowl, remove the blender jar and
are attached, assemble the blender cap onto the motor unit (see
but only the page 25).
blender works.
The citrus press All functions except the blender only work when
does not work. the blender cap is assembled on the motor unit.
Check whether the blender cap is assembled
properly on the motor unit (see page 25). Also
check whether the cone is assembled properly in
the sieve.
The blender Check whether the blender jar is assembled
does not work. properly on the motor unit.
2
Problem Solution
The appliance All functions except the blender only work when
cannot be the blender cap is assembled on the motor unit.
switched on. Check whether the blender cap is assembled
properly on the motor unit (see page 25). If you
want to use the food processor, check whether the
lid is properly assembled on the bowl ('click'). If
you want to use the citrus press, check whether
the cone is assembled properly in the sieve (see
picture on page 49). If you want to use the blender,
make sure the blender jar is assembled properly on
the motor unit.
The appliance The thermal safety cut-out has probably cut off the
suddenly stops power supply to the appliance because the
running. appliance has overheated. 1) Unplug the appliance
2) Let the appliance cool down for 60 minutes 3)
Put the mains plug in the socket 4) Switch on the
appliance again.
Dirt has Take the lid off the bowl, unscrew the Click & Go
entered the button by turning it anticlockwise and clean the lid
Click & Go in the dishwasher. If there is still dirt in the Click &
button. Go button, clean the lid in the dishwasher a second
time. If you do not have a dishwasher, you can also
let the lid soak in warm water with some washing-
up liquid for a while and then rinse it in fresh water.