Beta 1932B13 Manual De Uso E Instrucciones página 9

PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING PNEUMATIC TOOL
Failure to observe the following warnings may result in physical injury and/or disease.
ALWAYS WEAR HEARING PROTECTION WHILE OPERATING PNEUMATIC TOOL
ALWAYS WEAR EYE PROTECTION WHILE OPERATING PNEUMATIC TOOL OR PERFORMING
MAINTENANCE JOBS
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE OPERATING
PNEUMATIC TOOL
ALWAYS WEAR SAFETY SHOES
Additional personal protective equipment to wear according to the values found in the environmental hygiene/risk analysis survey if
the values exceed the limits under current regulations.
WEAR ANTI-VIBRATION GLOVES WHILE OPERATING PNEUMATIC TOOL FOLLOWING A
SPECIALLY CONDUCTED SURVEY ACCORDING TO LEVEL OF DAILY EXPOSURE OF HAND-
ARM SYSTEM TO VIBRATION
WEAR PROTECTIVE MASK AGAINST PHYSICAL AGENTS
PRODUCT SPECIFICATIONS
CHUCK CAPACITY
SPINDLE THREAD
FREE SPEED
POWER
AIR INLET
MAXIMUM PRESSURE
MINIMUM INTERNAL HOSE SIZE (Ø)
MAXIMUM AIR CONSUMPTION
WEIGHT
OVERALL LENGTH
SOUND PRESSURE LEVEL
SOUND POWER LEVEL
VIBRATION LEVEL
KEY TO SYMBOLS
a: side handle
b: air inlet 1/4" GAS
c: chuck reverse lever
d: chuck trigger
e: front nut rotation
f: open
g: closed
h: rear nut
i: front nut
l: oil lubrication
INSTRUCTIONS FOR INSTALLING DEVICES
Side handle installation
Fit the side handle (picture 2) onto the cylindrical sleeve of the pneumatic tool; then lock it by turning the knob. The side handle can be
so adjusted as to allow an absolutely convenient and firm working position to be taken.
Air supply connection
For optimal use of the pneumatic tool, always keep to a maximum pressure of 6.2 bars, as measured at the tool inlet. Feed the
pneumatic tool with clean, condensate-free air (picture 2). Excessively high pressure or humidity in supply air results in shorter life for
the mechanical parts and may damage the tool.
1.5 ÷ 13 mm
1/2" 20 UNC
400 rpm
0.34 kW
1/4" GAS, cone-shaped
6.2 bars
10 mm
180 l/min
1.6 kg
210 mm
89 dB(A) (EN ISO 15744)
101 dB(A) (EN ISO 15744)
2
<2.5 m/s (ISO 28927-2)