JVC KW-AVX848 Manual De Instrucciones página 46

Menu item
Display Sensor
1
Audio Input*
1
Video Input*
Camera Input
Navigation
1
You can change the setting only when the AV source is turned off.
*
2
When you watch a video of an AV component, select <AV-IN> for both <Audio Input> and <Video Input>.
*
Selectable setting/item
Change the condition for turning off/on the screen and the light of MENU/
ATT button.
Sensor: Select the condition of the screen for turning on.
Motion : The screen turns on when your hand moves closer to
♦
the motion sensor.
Touch : The screen turns on when your finger touches the touch
♦
panel.
Off : The screen is always turned on while the power is
♦
turned on.
Motion Sensitiv.: Change the sensitivity of the sensor for <Sensor>. (☞
above)
High, Low
♦
Time Out Mode: Select the condition of the screen when no operation is
performed for about 10 seconds while <Sensor> is set to <Motion> or
<Touch>. (☞ above)
♦ Simple : Source control buttons are displayed, and the light of
MENU/ATT button is turned off.
Backgrnd : The background and clock are shown, and the light of
♦
MENU/ATT button is turned off.
• You can change the background. (☞ page 39)
Black Out : The screen and the light of MENU/ATT button are
♦
turned off.
You can determine the use of LINE IN jacks.
AV-IN : Select to listen to the music from an audio component
♦
such as a portable audio player.*
iPod : Select when connecting the iPod/iPhone using the USB
♦
Audio and Video cable for iPod/iPhone. (☞ page 26)
You can determine the use of VIDEO IN jack.
AV-IN : Select to watch the video from an AV component such
♦
as a camcorder.*
iPod : Select when connecting the iPod/iPhone using the USB
♦
Audio and Video cable for iPod/iPhone. (☞ page 26)
On : Displays the picture from rear view camera when you
♦
shift the gear to the reverse (R) position.
Off : Cancels.
♦
Change the navigation settings. (☞ page 30)
46
Initial: Underlined
2
2