1.1. Tables of contents
1.1. Tables of contents
1.2. General information
1.3. Packing list
1.4. Recommendations
1.5. Technical features
1.6. Installation
1.7. Operating
1.8. Maintenance
1.9. Storing of distilled water
1.10. Spare parts
1.2. General information
1) Handle the parcel with care. Unpack and
check that the contents coincide with the
packing-list. If any part is damaged or
missing, please, notify to your supplier
immediately.
2) Do not install or use the equipment
without reading this handbook before.
3) This handbook must always be attached
to the equipment and it must be available
for all users.
4) IMPORTANT!
ACCEPT ANY APPARATUS TO BE
REPAIRED IF IT IS NOT DULY
CLEANED
5) If any modification, elimination or lack of
maintenance of any device of the
equipment by the user transgress the
directive 89!655!CEE, the manufacturer
is not responsible for the damage that
can ocurr.
6) Do not use the apparatus with liquids
which can give off vapours capable of
making explosive mixtures.
Rev. 010612
4
4
4
4
5
5
5
5
5
6
WE
WILL
NOT
1.3. Packing list
The standard equipment consists of the
following components:
Description
Heater
Filter
Level sensor
Feed tube
Support for water still
Set of silicone tubes
1.4.Recommendations
• Electric:
- Electrical wiring must be, at least, of 4
2
mm
section.
- It must have ground.
- Power point must let intensity of 13 A
pass.
• Outlet:
- The tap water should have screw mouth of
¾".
Pag: 4
Qty.
2
2
1
1
1
1