Publicidad
Idiomas disponibles
Idiomas disponibles
1.5.Technical features
Code
L-4 CABINET
1.6.Assembly
1. Be sure that heater elements (washer of
silicone rubber and PBTP nut) are in the
order and position that the photo shows.
2. Insert the heaters through the screw mouth.
3. Connect the end wiring of the heaters to
the corresponding sockets.
Rev. 010612
Code
Length
(cm)
L-4 CABINET
55
Output
Conductivity
(lts/h)
at
20 ºC
4
2 µS / cm
Width
Height
Weight
(cm)
(cm)
(Kg)
22
40
Water
Consumption
comsumption
(W)
(l/min)
1,4
2 x 1500
4. Put the water inlet tube on the inlet still.
5. Be sure of putting the filter, of tightening
and connecting the other end to the tap.
6. Be sure that the silicone tubes hold suitable
position to let water pass and to avoid
water pressures.
7. Be sure that the level sensor is connected.
12
Voltage
Intensity
(V)
(A)
230
13
Pag: 5
Publicidad
