THERMEx MINI PERPIGNAN Instrucciones De Montaje página 50

50
THERMEX MINI PERPIGNAN & MINI BORDEAUX
REVERSIBLE EXHAUST OUTLET
The exhaust outlet on the range hood can be reversed so that the exhaust outlet faces towards the rear. If a rear-facing exhaust is selected,
installation of the duct on the hood is optional.
The exhaust outlet is turned around using the following steps:
1
x2
Screw the bracket of the planel on the hood.
4
Lift out the motor and remove its plug.
7
Place the motor on the hood with the exhaust
outlet facing backwards.
2
x4
Unscrew the screws holding the panel onto the
hood.
NOTE: Make sure not to unscrew the screws
holding the motor to the panel.
5
Cut the two cable ties holding the motor wire
to the hood.
8
x6
Screw the panel with the motor onto the hood.
3
x6
Remove the strain relief on the electrical
cable.
6
Reverse the plug on the motor.
9
x4
Place the strain relief back on the cable.
M 540231181226012016
x2
x2