Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
01
hydraulic pump
02
oil filler cap (
code
03
anchor ring for shoulder strap (
04
integral handle
05
mechanical pressure release button (
06
battery residual power display
07
socket for connecting the remote hand controller
08
socket for connecting to external 24 v dc supply
09
quick release female automatic hydraulic coupler (
09
quick release female automatic hydraulic coupler
10
remote hand controller
-
n i
mh rechargeable battery
11
-
12
self
ventilating battery charger
(
ft)
3 metre
9.8
high pressure flexible hose with quick release
13
male / female automatic hydraulic couplings
shoulder strap (
14
canvas bag type cvb
15
16
remote pneumatic hand controller
The pump is supplied with the battery completely discharged; before use, fully charge the battery
using the charger supplied (see § 3.5).
In order to extract the battery from its housing we recommend you lay the pump on its back (see
Fig. 2): press the release button downwards (1) remove the battery (2); to insert it, simply slide it in
along the guides until it locks.
3.1) Setting up
– Carry the pump using the integral handle (04) or the shoulder strap (14) attached to the rings
(03) (see Fig. 9).
– Position the pump on a flat surface. There are two stable work positions recommended:
- vertical, resting on its base.
- horizontal, resting on its back where moulded ribs improve firmness and stability (see Fig. 3).
Should it be necessary however, the pump's hermetically sealed hydraulic circuit allows it to
operate in any position.
– Remove "REMOTE CONTROLLER" protective cap, connect the remote hand controller to the
socket (07) (see Fig. 4): tighten the plug (90) by turning the bezel clockwise until it locks.
– Check the high pressure hose (13), if abrasions are evident, or if the hose is kinked or damaged,
do not use; connect the hose to the hydraulic head, and to the corresponding female coupler
(09) on the pump (see Fig. 5).
5
2. UNIT DESCRIPTION (Ref. to Fig. 9)
6800076)
code
*
(
2596112)
code
,
220 - 240 V / 50-60 Hz (
6000354)
code
-
009 for storing accessories (
,
3. INSTRUCTION FOR USE
6040427)
6000476)
code
*
6060122)
code
,
for use with insulated pump only (
code
*
2593309)
code
for use with insulated pump only (
6060130)
code
2596100)
2596113)
code
Publicidad
Tabla de contenido
