Starting The Mixer (Manual Cooking Program); Starting The Mixer (Multi-Phase Program) - Firex CUCIMIX CBTE030 V1 Manual Del Usuario

USING THE MIXER
17.2

STARTING THE MIXER (MANUAL COOKING PROGRAM)

The mixer can be started or switched off by pressing the internal key or the external key.
To change the mixing type and speed refer to the "MIXER SETTINGS" paragraph.
When the pan is tilted, the mixer stops automatically.
17.3

STARTING THE MIXER (MULTI-PHASE PROGRAM)

If the selected program involves the operation of the mixer, after pressing the START key, a message will
appear with a countdown for mixer start up.
If you do NOT want to start the mixer, press the "STOP MIXER" key. If you do want to use it, simple wait
for the time to run out.
Attention:
This message will appear in the program every time there is a phase with NO active mixer,
followed by a phase with active mixer.
To change the mixing type and speed refer to the "MIXER SETTINGS" paragraph.
The changes made will NOT be saved in the program, and will only be valid for the phase currently
running!
Whenever the mixer is turned off voluntarily, the key flashes to indicate that the mixer is required for that
phase.
Attention: if during the current phase (where the program involves the mixer) you manually decide
not to choose any type of mixing (all 3 buttons light grey), the key does NOT flash!
04-CBT030-TOUCH-DU-01-EN
45