Before First Use; Turning On The Appliance - Gastrorag DK100 Manual De Instrucciones

Turning on the appliance

EN

Before first use

1. Unpack the appliance and place it on a stable stand with a height
of 25-35 inches with a flat horizontal surface.
2. Remove the accessories from the packaging. Remove the
protective film from the stainless steel surfaces.
3. Clean this appliance in accordance with the instructions in the
Maintenance and Care section.
Turning on the appliance
BREWING COFFEE/TEA
1. Remove the lid. Remove the infuser and water pipe from the water
tank. Fill the tank with cold drinking water. It is not allowed to fill
the tank with hot water. The volume of water should be at least half
the volume of the tank (see the section Technical Specifications).
The water level must not exceed the maximum level. The filling level
of the tank can be monitored with the help of the measuring glass
readings.
2. Pour 2/5 ounces of medium-ground coffee or 1/5 ounces of tea
into thefilter of the coffee basket. Coffee should be evenly
distributed over the filter. Do not put too much coffee in the coffee
basket.The coffee level should be below the edge of the coffee
basket by at least 1 inch.
3. Insert the water pipe into the infuser. Install the coffee basket with
the water pipe in the tank so that the base of the tube fits inside the
heating element. Close the infuser with a lid. Do not remove the lid
while making coffee.
4. Turn on the power (plug in the power outlet).
5. Connect the appliance to the supply system using the power
switch. At the same time, the boiling indicator should light up,
indicating that the appliance is turned on.
7