Box Contents; Assembly - Greencut PP400L Manual De Instrucciones

44

BOX CONTENTS

• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, please contact the Official Technical Service. Do not
use this product without replacing the part. Using this product with damaged or missing parts can
cause serious injury to the operator.

ASSEMBLY

REAR AND FRONT TUBE
1. Place the lower tube into the upper tube, note that both the upper and lower tubes have a guide groove.
2. Screw on the shaft coupler so that the upper and lower tubes do not swing.
1. Loosen the coupler from the shaft, remove the lower tube to separate the upper and lower tube.
x 1
x 1
x 1
1
2
x 1
x 1
2
1