Panasonic HBE5 Serie Instrucciones De Operación página 9

Check the following before calling for servicing. Check the following before calling for servicing.
Symptom Symptom
Heating/Cooling operation is not working
effi ciently.
Heating mode cannot be operated.
Noisy during operation.
The unit does not work.
" "CHECK" CHECK" Display on Wired Remote Control. Display on Wired Remote Control.
If the CHECK indicator fl ashes on the wired
remote control.
NON SERVICEABLE CRITERIAS NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY then CALL Authorized Distributor under the following conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the remote control.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning properly.
• The odour persists even after odour wash operation is used continuously.
Check Check
• Set the temperature correctly.
• Close all doors and windows.
• Clean or replace the fi lters.
• Clear any obstruction at the air inlet and air outlet vents.
• The unit is forced to operate at cooling mode only in a non-living room,
such as a computer room.
• Check if the unit has been installed at an incline or the intake grille is not
closed properly.
• Check if the circuit breaker is tripped.
• Check if timers have been set.
• Turn off the unit.
• Turn on again after 3 minutes.
• If CHECK continues to blink, press
persist, please consult your nearest authorized dealer.
for error messages. If problem
CHECK
9