1
Air Compressor
2
Aftercooler
3
Condensate Separator
4
Receiver
5
Automatic Drain
Ceramic Prefilter 10μ
6
7
Dust Filter 5μ
8
Dryer
9
Solenoid drain valve
10
Coalescing Filter 1μ - 0.1 mg/m
Coalescing Filter 0.01μ – 0.01 mg/m
11
12
Activated carbon filter 0.003 mg/m
13
Water/Oil Separator
In order to optimise the use of the dryer, we suggest to place it in such a way that all the control
instruments of the machine will result easily visible.
Installing a ceramic pre-filter on the air inlet of the dryer, this will be better protected from eventual
solid particles, as it prevents the accumulation of oily materials on the heath exchangers.
L'absence d'installation ou d'entretien d'un filtre correct annule la garantie.
3.1 CONTROL PANEL
The machines belonging to this series are provided with an electronic system for parameters modification, so eventual
reset operations can be performed by means of the digital panel located on the front of the dryer.
The control panel is composed of 5 keys (ON/OFF, TEST, SET, DOWN e UP) and a 3 digit display, with three
signalling LEDs shown as DP1, DP2 and DP3.
Under normal operating conditions the display controller shows the temperature read by the probe without decimal
degrees. When an alarm condition occurs, the display shows the relevant alarm code.
Pic.2 control panel
Cod. 710.0138.20.00 Rev 05B – 03.2016
3
3
3
Pic 1
3. START UP
ENGLISH
Water
Water
5