How To Maximise Your Security And Protection Of Your Machine - Pecol MCSDSP850PRO Manual Del Usuario

1. How to maximise your security and protection of your machine

Failure to observe at least the following instructions may cause immediate damage to
the user and/or the equipment.
1. Follow the safety recommendations in this manual (see pages 53 and 54).
2. Take into account the effects of kickback and attitudes to minimise it (see pages
55 and 56).
3. Do not fix the drill or accessories with dirt and do not use drill or accessories
of poor quality or poor conservation. Do not carry out any adaptation of accessories,
parts, etc. (see pages 57, 58, 59, 60, 61, 62, 65 and 66).
4. Do not allow abrasive particles, water and other foreign matter inside the SDS
Plus chuck and always keep it lubricated (see pages 57 and 62).
5. Do not use grease other than that recommended or supplied by PECOL and do
not mix lubricants (see pages 62, 61 and 66).
6. Do not rotate the mode select button until the machine is completely stopped
(page 57).
7. Do not invert the direction of rotation until the machine is completely stopped
(page 56).
8. Carry out maintenance only in accordance with this manual or the PECOL
Technical Assistance Service (see pages 61 to 65).
9. Do not connect to a power grid that is not compliant with the intended use of the
power tool (see pages 50, 63 and 64).
10. Do not use the SDS Plus docking chuck in combination with hammering modes
(see pages 58 and 59).
11. Do not carry the machine, drills and accessories to the limit of its capacity (see
pages 50, 54, 55, 58, 59, 60, 63 and 64).
FR EN ES
P.49
PT