Preparation For Drilling Concrete, Brick, Stone And Similar; Preparation For Drilling Metals, Wood, Plastics And Composites - Pecol MCSDSP850PRO Manual Del Usuario

3.9. Preparation for drilling concrete, brick, stone and similar

3.10. Preparation for drilling metals, wood, plastics and composites

Cylindrical insert drills can be used through the intermediation of a chuck with SDS
Plus insert. However do not use this adapter in hammering mode.
HSS metal drills should be used at low speeds. If necessary, use PECOL P220, suitable
lubricant for drilling. Hard metals need a little more pressure on the bit.
The maximum efficiency of this hammer will only be grasped with the use of quality
and sharp drills. Investing in quality drills and accessories tends to outweigh the cost
of an inefficient operation. On page 66 you will find indications of items that can be
purchased.
P.58
PT ES
Examples of typical drills for drilling concrete, stone and
similar.
Metals, plastics and
composites
Wood and derived
products
EN FR