Kohler K-142 Guia De Instalacion página 10

Washer
Dish
Washer
Nut
End Body
Outlet
End Body
O-Ring
Hose
8. Handle Valve Installation
Remove and save the dished washer and nut from the valve
bodies.
Install a flexible hose to each valve body outlet. Tighten securely,
but do not overtighten.
Apply a bead of plumbers putty or other sealant to the underside
of the escutcheons according to the manufacturer's instructions.
NOTE: The valve body marked "COLD" with blue lettered tape
attached to the tube should be installed to the right of the faucet.
Insert the valve bodies into the proper mounting holes.
From the underside of the bidet, slide a dish washer, washer, and
nut onto each valve body.
Rotate each valve body until the copper tubing faces toward the
outside of the bidet and the outlets face each other.
Slide a washer and loosely thread a nut onto each valve body.
Firmly hold the valve bodies in place and then securely tighten
the nuts with a wrench. Do not overtighten.
Remove any excess putty or sealant.
1010448-2-F
End Body
Escutcheon
Apply Plumbers
Putty.
Disc Washer
(When Required)
Washer
Nut
10 Kohler Co.