Brinkmann Maxfire Manual Del Propietário página 32

Step 19
Unscrew the pre-attached bolts
from the tank retention bracket.
Attach tank retention bracket in
between right front and rear cart
legs using the two pre-attached
M6 x 20 mm bolts as illustrated.
Attach the tank brace by inserting
the carriage bolt through the
keyhole, slide down and then
use the wing nut to secure.
Step 20
Place the hood on the firebox.
Be sure the hood hinge and the
firebox hinge align. (as shown
below)
Step 21
Insert hinge pin through the two
hinges. Secure with the hitch pin,
by inserting into the hole in the
hinge pin.
31
Hood
Hinge
Firebox
Hinge
Hood Hinge
Tank Brace
Carriage Bolt
Bolts
Pin
Firebox
Hinge
Wing Nut
Hood
Hood
Hinge
Cotter Pin