Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Fitting Kit
K323
Carefully select desired position for
crossbars on vehicle roof.
Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
crossbar adjustment.
Apply masking tape to vehicle roof in all four
positions.
Make sure there is no interference between
what you intend to carry with aerials, sunroof
or tailgate.
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 4/8") (unless otherwise stated).
Trace around rubber pad using a pencil or
pen.
Repeat for all four positions.
Remove both pins from each leg. Use
tapered end of spanner located inside left
hand cover to assist.
Repeat for all legs.
4
Publicidad
