Safety Symbols - Westinghouse HTA40 Manual De Usuario

SAFETY SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
Symbols Name
V Volts
A Amperes
Hz Hertz
W Watts
min Minutes
SPM Strokes per Minute
Alternating Current
Direct Current
/min Per Minute
Wet Conditions Alert
Read the Operator's
Manual
Eye Protection
Safety Alert
Sharp Blade
Gloves
Keep Bystanders
Away
Ricochet
Designation/Explanation
Voltage
Current
Frequency (cycles per second)
Power
Time
The number of back-and-forth strokes the blade makes per
minute
Type of current
Type or a characteristic of current
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations
To reduce the risk of injury user must read and understand
operator's manual before using this product.
Always wear eye protection with side shields marked to
comply with ANSI Z87.1 when operating this equipment.
Precautions that involve your safety.
Do not install or use any type of blade on a product
displaying this symbol.
Wear non-slip, heavy duty gloves.
Keep all bystanders at least 50 ft. away.
Thrown objects can ricochet and result in personal injury or
property damage.
3