Forza FR304GN Manual De Instalación página 15

4) With the foam base still in place, move the range indoors before installing the legs, position the appliance near its final
location as the legs are not suitable for moving the appliance over long distances.
5) Pull out the hand-truck, tilt the range laterally and insert the legs.
6) After the electrical and gas connections (see both paragraphs for instructions) measure the four corners in cutout
area to verify if flooring is level. Adjust the leveling legs to the desired height and ensure range is level. Turn the
bottom section of each leg counter-clockwise to raise the leg and clock wise to lower it. Ensure floor is protected and
slide unit into place making sure to engage the anti-tip bracket.
7) The kickplate should be assembled under the oven door. In the front side of range there are threee holes and two slots.
To Hook the kickplate to the range, insert the two clips in the two slots, as follows:
The kickplate can be fixed to range by three srews included inside the range. See below:
Moving the Range
Due to the weight, a furniture dolly with soft wheels or an air lift should be used to move this unit. The weight must be
supported uniformly across the bottom.
Shipping Weight
Weight without packaging materials
30'' RANGE 36'' RANGE
331 lbs (150Kg) 384 lbs (174Kg)
243 lbs (110 kg) 287 lbs (130 kg)
15
48" RANGE
441 lbs (200Kg)
377 lbs (171 kg)
EN