Forza FR304GN Manual De Instalación página 7

FOR MASSACHUSETTS INSTALLATIONS:
1. Installation must be performed by a qualified or licensed contractor,
plumber or gas fitter qualified or licensed by the state, province or
region where this appliance is being installed.
2. Shut-off valve must be a "T" handle gas cock.
3. Flexible gas connector must not be longer than 36" (914mm).
NOTE: This range is NOT designed for installation in manufactured (mobile) homes or Recreational Park Trailers.
Mobile Home Installation
The installation of this appliances must conform to the Manufactured Home Construction and Safety Standards, Title 24
CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety; Title 24 HUD part 280); or when
such standard is not applicable, the Standard for Manufactured Home Installations (Manufactured Home Sites, Communi-
ties and Setups), ANSI A225.1 - latest edition, or with local codes.
IMPORTANT: GAS TYPE VERIFICATION
Before connecting the appliance to the gas supply line, ensure that its gas setting is appropriate.
The type of gas adjusted and shipped from the factory is indicated on the rating plate.
When connecting the unit to propane gas, make certain the propane gas tank
is equipped with its own high pressure regulator in addition to the pressure
regulator supplied with the range. The maximum gas pressure to this
appliance must not exceed 14.0" water column (34.9 mb) from the propane
gas tank to the pressure regulator.
CAUTION: These ranges weigh up to 400 pounds. Some disassembly will reduce the weight considerably.
Due to the weight and size of the range and to reduce the risk of personal injury or damage to the product:
TWO PEOPLE ARE REQUIRED FOR PROPER INSTALLATION.
7
EN