3.3.2 How To Assemble The Sprayer - Swissmex 319310 Manual Del Operador

3.3.2 How to assemble the sprayer:

Compression sprayers:
1. Remove all the parts from the box and tank.
2. After removing the nozzle from the bag fix it in the spray lance.
3. Place the applicator upright on a table, assemble the spray tube with the gun and tighten firmly.
4. Your sprayer is ready to use.
1
Backpack sprayer:
1.- Take the loose parts out of the tank.
2.- Place the strainer on the filling port and then the tank lid.
3.- Insert the connecting rod in the pump tube placing one flat washer on each side, fix them with the lock pins "C".
4.- Pass the pump handle through the base of the tank fixing it to the connecting rod with a flat washer and a lock pin
"C" and on the other end with a lock washer and a cotter pin.
5.- Assemble the nozzle to the spray lance. Lightly tighten without tools.
6.- Assemble the spray lance to the shut-off and tighten manually. Make sure the gasket is in place.
1
3
4
2
3
4
2
4