Unpacking The Weigh Module - Mettler Toledo WXS Serie Manual De Usuario

* under good environmental conditions (free of vibration and air draft)
** applies only after adjustment at nominal capacity with an OIML E2 weight
*** time between placing the weighed object on the weighing pan and indication of a stable weighing
value under optimal environmental conditions

3.2 Unpacking the Weigh Module

Unpacking the electronic unit and terminal:
1 Remove the top foam cushion.
2 Remove the unit and the hardware.
Unpacking the load cell:
1 Remove the foam cushion and take out the hardware.
2 Carefully lift the white cushion containing the load cell out of the
box and place it on a level surface.
3 Carefully pull the white cushioning material a few inches apart
and remove the load cell.
Note
We recommend to keep the original packaging and to use it to transport the balance. The weighing
pan must always be removed before transportation. Mount the protection cap to protect the interior of
the weigh module.
Weigh Modules WXS/WXT Weigh Modules 7