Proxxon CW-matic Manual De Instrucciones página 10

G
Translation of the Original Operating Instructions
Dear customer!
Using these instructions
• makes it easier to get familiar with the device
• prevents malfunctions caused by improper handling,
and
• lengthens the service life of your device.
Please keep these instructions readily accessible at all times.
Use the device only when you have understood it exactly and al-
ways adhere to the instructions.
PROXXON is not liable for the safe functioning of the device in ca-
ses of:
• handling that does not conform to the usual usage,
• purposes of use not designated in the instructions,
• disregard of the safety instructions.
You are not entitled to guarantee claims in cases of:
• operator errors,
• inadequate maintenance.
For your own safety, please follow the safety instructions exactly.
Use only genuine PROXXON replacement parts.
We reserve the right to make improvements in the sense of tech-
nical progress. We wish you much success with the device.
1 Safety instructions
Before commissioning the device, please read the following safety
instructions through precisely!
Please ensure you have the correct mains voltage: Your CW-matic
is designed for operation with 240 volts! Never operate it with a
different voltage!
Never touch the mains cable with wet hands! There is the risk of
electric shock!
In order to avoid the risk of electric shock, never submerge the va-
cuum cleaner in water or expose it to rain!
Never allow the vacuum cleaner to tip or fall!
Before working with the CW-matic, check the filter inserts for dirt
and good condition!
Never vacuum hot materials (e.g. burning cigarettes or hot ash)!
Please only have repair work carried out by qualified specialist
personnel!
Never vacuum flammable or volatile liquids!
Never vacuum materials or dust that are hazardous to health!
Keep the vacuum cleaner away from sources of heat!
Before use, please check the perfect functioning of the device
each time, particularly the mains cable! If the mains cable is faulty
it must be replaced by an authorised technician!
Risk of electrocution! If the mains cable is damaged during work,
- 10 -
immediately disconnect the mains plug! To disconnect, always
hold the plug, never pull on the mains cable!
Before vacuuming liquids and damp materials, always remove the
paper filter bags! This procedure is explained in these instructions.
Always disconnect the mains plug before all maintenance and cle-
aning work! Never open the device with the mains cable plugged
in! Risk of electrocution!
Please note: The cloth filter must always be fitted when the device
is being operated!
Note: Do not make any structural change to the vacuum cleaner!
There is the risk of electric shock or other safety risks.
2 Legend Fig. 1
1. Handle
2. Housing top part
3. Clip
4. Dust box
5. Wheel
6. On-off switch
7. Socket cover
8. Parallel switch
9. Hose connection
10. Socket
11. Washable filter
12. Blast nozzle
13. Feed
14. Vacuum hose
15. Cloth filter
16. Dust bag
17. Pipe extensions
18. Floor nozzle
19. Round brush
20. Joint nozzle
21. Rubber connecting piece for suction
22. Clamping adapter
3 Description of the CW-matic
The compact workshop CW-matic vacuum cleaner not only offers
high vacuum performance and smooth running, but also a useful
blasting function, the automatic control function and even the pos-
sibility of vacuuming liquids (water):The robust box and the lid are
watertight. To this end the filter elements are removed.
The control mechanism is practical: An electrical appliance can be
connected via a separate socket, and when the appliance is swit-
ched on, it automatically starts the vacuum cleaner. After the po-
wer tool is switched off, the vacuum cleaner also switches off
automatically again with a follow-up time of 5 seconds.
The top part of the housing is simple to remove after releasing two
clips, making it easy to clean the box.
And to use the blast function, the vacuum cleaner hose only needs
to be reconnected: Ideal for cleaning and drying.