Alesis CONCERT Guia Del Usuario página 10

Effects
With the Concert, you can add adjustable Reverb and/or Chorus effects to your sound.
To enable the effects:
1. Press the Reverb/Chorus button once to turn on the reverb effect. The button LED will be lit green
when only the Reverb effect is enabled.
2. Press the Reverb/Chorus button again to turn off the reverb effect and turn on the chorus effect. The
button LED will be lit red when only the Chorus effect is enabled.
3. Press the Reverb/Chorus button again to turn on both the reverb and chorus effects. The button LED
will be lit amber when both effects are enabled.
4. Press the button again to turn off all effects. The LED will be off when no effects are enabled.
To adjust the reverb type:
1. Press the Metronome and Lesson buttons at the same time to enter Advanced Function Mode. The
two button LEDs will be lit.
2. Use the keys marked Reverb 1–5 to select the desired reverb type.
3. Press both the Metronome and Lesson buttons again to exit Advanced Function Mode.
To adjust the chorus type:
1. Press the Metronome and Lesson buttons at the same time to enter Advanced Function Mode. The
two button LEDs will be lit.
2. Use the keys marked Chorus 1–5 to select the desired chorus type.
3. Press both the Metronome and Lesson buttons again to exit Advanced Function Mode.
10
Parameters
1
2
3
4
5
Parameters
1
2
3
4
5
Reverb Type
Room
Hall
Church
Delay
Pan Delay
Chorus Type
Chorus 1
Chorus 2
Chorus 3
Flanger
Rotary