Samsung HL-T7288W Manual Del Usuario página 75

Zooming-In
1 After switching the mode to WISELINK, select a memory device that you have installed.
(Refer to page 70~71)
2 Press the ENTER button to select Photo.
JPEG files and existing folders are displayed.
3 Press the ▲ or ▼ button to select a photo, then press the ENTER button.
Pressing the button over a photo icon shows the currently selected photo in full
➢
screen.
4 Press the TOOLS button.
Press the ▲ or ▼ button to select Zoom, then press the ENTER button.
Each time the ◄ or ► button is pressed, the photo size decreases or increases.
(x1 → x2 → x4)
● x1: Restore the photo to its original size.
● x2: Zoom-in to the photo x2.
● x4: Zoom-in to the photo x4.
5 To move the enlarged photo image up/down/left/right, press the ENTER button,
then press the ▲/▼/◄/► buttons.
Note that when the enlarged picture is smaller than the original screen size, the
➢
location change function doesn't work.
To exit WISELINK mode, press the EXIT button on the remote control.
The enlarged file is not saved.
➢
Press the WISELINK button on the remote control to turn on the WISELINK mode.
Zoom function information icon (Displayed at the top left of the screen).
Icon Current OSD
Zoom (x 1)
Zoom (x 2)
Zoom (x 4)
Pan Up
Pan Down
Pan Left
Pan Right
Function
Restore a photo to its original size.
Zoom-in to a photo x2.
Zoom-in to a photo x4.
Pan up to view the upper part of a zoomed-in photo.
Pan down to view the lower part of a zoomed-in photo.
Pan left to view the left side of a zoomed-in photo.
Pan right to view the right side of a zoomed-in photo.
English - 75
Continued...